Gorilla Glue is considered one of the strongest glues, so removing it can be difficult if you don’t do it properly.
We have devised an easy solution and are sharing it with you in simple steps so that you can get rid of this mess.
Key Points
- Soaking is the easiest way to remove Gorilla glue from plastic.
- Ensure to cover the surrounding surface to avoid spills and mess during the cleaning process.
- Gently scrape the glue; otherwise, it can damage the plastic.
- You can also use commercial adhesive remover or nitromethane to remove the glue.
Detailed Method of Removing Gorilla Glue From Plastic
When removing Gorilla glue from plastic, you cannot use any solvent remedy because it may not be suitable for plastic.
Harsh solvents, such as alcohol or acetone, can eat through the surface of the plastic, making it difficult to remove glue from it.
Soaking is the easiest and most effective method to remove any glue residue. Let’s read further.
Step 1: Soaking
The first thing you need to do is cover the area with a cloth or something else to prevent damage to the surface.
After that, soak a cloth in a mixture of warm water and dish soap.
Step 2: Use A Cloth
After that, lay the cloth on the glued area. Keep it like that for 1-2 hours to make the glue absorb all the moisture.
Now, apply more of the water-dish soap solution to keep it moisturised.
Step 3: Remove the Cloth
After 2 hours, remove the cloth and wipe off the area. This is supposed to remove the glue from the surface.
Step 4: Scraping
However, if the glue isn’t removed with the wiping process, gently scrape the glue with the help of a putty knife.
Step 5: Wipe
Once the process is done and the glue is removed, wipe out all over the surface properly and clean it.
Note that you can also use a commercial adhesive remover to remove the glue to avoid any hassle.
Another option is nitromethane. It’s safe to use on plastic, but remember that some kinds of plastic react differently.
So, a pre-test is always recommended to ensure it’s safe.
Things You Should Be Cautious About
When removing the substance, you should do a few things. First, wear gloves. They keep your hands protected from spills.
Another thing to consider is following the instructions on the glue packaging.
While scraping, be gentle and patient. Don’t be in a hurry; otherwise, you will damage the surface beneath.
Editor’s Note
Although there are different ways to remove Gorilla Glue from plastic, we share the most straightforward method possible so you don’t have to spend a lot of time on it.
I hope this process works as it should to minimize your hassle.